top of page
HOME-BANNER-McLaren.jpg

POWER UNLEASHED !!

The VAITRIX team consists of some of the most professional performance tuners and engineers from around the world.

2
Adjust-interface-3
MAP-under-1
MAP-under-1
MAP-under-2
MAP-under-2
MAP-under-3
MAP-under-3
MAP-under-4
MAP-under-4
MAP-under-5
MAP-under-5
MAP-under-6
MAP-under-6
MAP-under-7
MAP-under-7
MAP-under-8
MAP-under-8
MAP-under-9
MAP-under-9-1
Adjust-Interface-2
Adjust-interface-1
MAP-0-1
MAP-0
MAP-02-1
MAP-02
MAP-1-1
MAP-1
MAP-2-1
MAP-2
MAP-3-1
MAP-3
MAP-4-1
MAP-4
WEB-2
MAP-under
new

1.Cloud servers options

2.Data traffic record and cursor shapes 

3.Plug-in connection status and data access

4.Transmitting data to the plug-in from the computer

5.Automatically displays 

6.Programmable data system

7.Data and features settings

8.Map copy

OP-1

The highest and lowest
safe range of values

can be programmable, such as operating output signal and output response time. 

2
WEB-2

SWITCH CONTROL / METHANOL INJECTION MAPPING

SWITCH ON

SHUT OFF

Adjust-Interface-4-new
DUTY-1
SW-1
VALVE-OPEN
METHANOL-OPEN
VALVA-CLOSE
METHANOL-CLOSE

Injection switch on/off is based on X-axis engine rev and Y-coordinate output of load shaft. 1 stands for ON and 0 stands for OFF.  The status displays ON when switching on, and displays OFF when shutting off.

80% means large amount of methanol

20% means small amount of methanol

WEB-2

Methanol injection output power is based on X-axis engine rev and Y-coordinate output of the load shaft. The output power ranges from 0% to 100%. The larger the data is, the higher the output power.  0% means 0% duty cycle; 100% means full power 100% duty cycle.  

BATTERY VOLTAGE CORRECTION

Battery-Voltage

Automatically correct battery voltage can be adjusted to prevent different output timing due to unstable output voltage when the vehicle alternator is running. This can not only correct ineffective working hours, but also stabilize the system. 

BATTERY VOLTAGE-1
BATTERY VOLTAGE-2

When the battery voltage correction is turning on at 100%, the volume of
methanol can be injected the same as output power.

When the battery voltage correction is turning on at 50%, it will compensate 
for relative high and low voltages.

BATTERY VOLTAGE-3

When the battery voltage correction is turning on at 0%, the power output will 
not be calibrated. 

Boost-Pressure-new

BOOST PRESSURE SETTING

The maximum boost pressure can be set to prevent
the engine from being overcharged.

Liquid-Level-new

LOW LIQUID LEVEL AUTO SHUTDOWN SETTING

Enabling the auto shutdown function results in the
system automatically shutting down when the methanol
liquid level in the tank falls below the safe limit.

RPM

CYLINDER CAPACITY SETTING

1, 2, 3, 4, 5, 6, 8 and 10 different engines speed
are supported.

BATTERY VOLTAGE CORRECTION

DATALOG-FUNCTION

The display of data traffic can be turning on/off by selecting the below switch options from 1-10, so the adjustment of computer data can be more convenient. 

CLOUD MAPPING DATA DOWNLOAD

MAPPING-DATA

Car models and data can be selected through online cloud system. Multiple purposes in one machine make the performance setting more easily.

SAFETY-SWITCH-NEW
bottom of page